Osyma

Polígono de Los Agustinos Calle G - D4O
31160 ORCOYEN (Navarra)
Dirección Postal: Apdo. 1082
31080 Pamplona, España
Tel. 34-948-35 13 14. Fax 34-948-35 13 33

Directives

Guardavivo Deployé

Guardavivo Deployé

Guardavivo Perforado

Guardavivo Perforado

Guardavivo Exterior

Guardavivo Exterior

Guardavivo Exterior Deployé

Guardavivo Exterior Deployé

Guardavivo Exterior Arcos

Guardavivo Exterior Arcos

Perfíl Junta Dilatación

Perfíl Junta Dilatación

Perfíl Terminación Revoco Horizontal

Perfíl Terminación
Revoco Horizontal

Perfíl Terminación Revoco Vertical

Perfíl Terminación
Revoco Vertical

Guías Maestras

Guías Maestras

INSTRUCTIONS ABOUT USING OUR PROFILES

  1. Do not mix salty water with plaster or mortar
  2. Make sure a quick dry through a correct ventilation inside
  3. Make sure material(plaster, mortar,…) is suitable for use with the profile chosen.
  4. Do not cut the profiles with a parting-off grinder because galvanisation can be damaged. It is advisable use hand plate shears.
  5. Choose inside or outside profiles depending on their application.
  6. Profiles put near the ground or subjected to be splashed should be protected by a suitable coating or profiles made by stainless steel have to be used.
  7. In damp rooms, shafts, bathrooms, kitchens, or rooms without windows with compulsory ventilation and places where special circumstances in the construction and its environment require an optimum protection against corrosion is advisable using our stainless steel profile.
  8. Do not plaster up to the corners of stainless steel profiles with tools made of normal steel because there is a danger of extraneous rust.
  9. Make sure about the profile is suitable with the coating’s thickness.
  10. Avoid profiles boxes becoming wet or damp during the transport or storage. If so it is indispensable take out the profiles and put them in a dry place.
  11. Avoid storing in places with a high damp grade or places without ventilation. It is advisable the storing in dry, covered and with a correct ventilation.

COMPATIBILITY

Make sure the plaster is suitable for use with the profile material complying with the following rules:

  • Galvanised steel profiles are suitable for lime , lime cement, mortar, plaster and cement.
  • Aluminium profiles are suitable for gypsum and synthetic resin plasters and primers for interior use.

So that we advise making a studio in case other kind of materials are used , being in this case responsibility of the user the use in those circumstances of our profiles.

GUARANTEE

As the composition and the physical and chemical properties of the material used, as well as the storage and the placement of the profiles are outside our company’s influence we can not guarantee the resistance of our profiles to be rusted.

The transport and storage once profiles are supplied as well as the using of our profiles require a specific conditions that we have advertised previously being the customer the only responsible in case it do not comply with them.

Osyma is not responsible of the consequences in case the conditions above showed are not carried out.




Legal :: Privacy policy :: Copyright © OSYMA, S.A

Polígono de Los Agustinos Calle G - D4O / 31160 ORCOYEN (Navarra)
Dirección Postal: Apdo. 1082 / 31080 Pamplona, España
Tel. 34-948-35 13 14. Fax 34-948-35 13 33